type structure, which is conducive to the smooth removal of dirt. Angle type mud valve is a kind of water supply system which is used in parallel with water and domestic water. When the fire occurs, the fire need a lot of water, immediately cut off the water, ensure adequate fire water; when the fire to stop the water pressure decreases, the valve automatically opens, a normally open state, restoration of water supply. The valve makes the system need not set up a special fire separate water supply network, greatly saving the cost of construction and water consumption. The valve has high sensitivity, safety and reliability, easy to debug, and long service life.
Note: parameters are for reference only, or are not full. Valve can be used in accordance with the requirements of different pressure, material, diameter, drive, etc.. Specific please contact or online advisory contact.
Hydraulic control valve is a pressure control valve, hydraulic control valve comprises a main valve and attached to the catheter, guide valve, needle valve, ball valve and pressure gauge etc.. According to the use of purpose, function and place the different can be turned into a remote control float valve, pressure relief valve, slow closing check valve, flow control valve, pressure relief valve, hydraulic control valve, pump control valve, etc.. Angle type mud valve to be installed before the filter, and should facilitate the requirements of sewage. Water control valve is a self - run water body, no need to add oil lubrication. But in the engineering application of hydraulic control valve, there are some errors, such as the applicable conditions of the valve, the valve design requirements, installation points, etc..
簡(jiǎn)體中文版
English
