蜜桃羞羞片网站入口~,精品视频每日更新

Home > Products > Regulator valve > Self operated electronic temperature regulating vaZZWPE

Description Material Performance Product Size Specifications

Electronically controlled temperature self regulating valve (applies to the larger diameter and thermal oil control), the biggest characteristic of this valve only ordinary 220V power, the media's own energy to be transferred, directly to the steam, heat, oil and gas as the medium temperature automatic regulation and control, can also be used in preventing overheating or heat exchange on occasion the valve has the advantages of simple structure, convenient operation, selection, temperature range, fast response, reliable sealing performance, and can be in operation to adjust, so it is widely used in chemical, petroleum, food, textile, and other departments of the hotel and the hotel hot water supply. Product features: this series of products of nominal diameter from 20 to 200mm, 1, 1.6, nominal pressure 4 6.4MPa, the temperature range of ~350 DEG C by -20, 0~10mA.DC or 4~20mA.DC to accept the signal change by adjusting the media flow, make the controlled parameters to maintain a given value, the single seat adjustment for pressure the difference is small, medium viscosity or slightly granular impurities occasions. Sleeve adjustment type is suitable for pressure difference.

Valve body, valve cover：HT200、ZG230-450、ZG1Cr18Ni9Ti
spool：ZG1Cr18Ni9Ti、Our surfacing Stellite Alloys Reinforced PTFE
Packing: PTFE, flexible graphite
Push rod, bushing：2Cr13
Gasket: asbestos rubber sheet、10、1Cr18Ni9Ti Asbestos gasket
corrugated pipe：1Cr18Ni9Ti

Regulating range：

Regulating range CN(mm)			15	20	25	32	40	50	65	80	100	125	150	200	250
Valve seat diameter DN(mm)			1.6 4.0
Rated flow coefficient Kv		Single seat	5	7	11	20	30	48	75	120	190	300	480	760	1100
		Two seater			12	22	33	53	83	132	209	330	528	836	1210
		Sleeve			11	20	30	48	75	120	190	300	480	760	1100
Rated travel（mm）			6			8	10	14		20				35
Allowable differential pressure Mpa）			1.6								1.5		0.5
Temperature regulating range（℃）			10-20、20-40、30-50、40-50、50-60、60-70、70-80、80-100………180-200
Adjustment precision（％）			±5
Allowable overload value（℃）			Respectively, the temperature adjustment range50
Using ambient temperature（℃）			-40～±80
Mounting joint			G1
Capillary length（m）			3、5
Allowable leakage	Hard seal（1/h）		Two seater, sleeve: 5 x 10 - 3 x 10: single seat valve rated capacity, rated capacity of 4 * - valve
Allowable leakage	Soft seal（ml/min）		0.15	0.15	0.15	0.30	0.30	0.45	0.60	0.90	1.70	4.0	4.0	6.75	11.10

Main parameters are shown in Table 1.：

Nominal diameter CN(mm)			15	20	25	32	40	50	65	80	100	125	150	200	250
Valve seat diameter DN(mm)			1.6 4.0
Rated flow coefficient Kv		Single seat	5	7	11	20	30	48	75	120	190	300	480	760	1100
		Two seater			12	22	33	53	83	132	209	330	528	836	1210
		Sleeve			11	20	30	48	75	120	190	300	480	760	1100
Rated travel（mm）			6			8	10	14	20				35
Allowable differential pressure Mpa）			1.6								1.5		0.5
Temperature regulating range（℃）			0～70、50～120、100～170、150～220、200～270
Adjustment precision（％）			±5
Allowable overload value（℃）			Respectively, the temperature adjustment range50
Using ambient temperature（℃）			-40～±80
Mounting joint			G1
Capillary length（m）			3、5
Allowable leakage	Hard seal（1/h）		Two seater, sleeve: 5 x 10 - 3 x 10: single seat valve rated capacity, rated capacity of 4 * - valve
Allowable leakage	Soft seal（ml/min）		0.15	0.15	0.15	0.30	0.30	0.45	0.60	0.90	1.70	4.0	4.0	6.75	11.10

Nominal diameter(DN)	15	20	25	32	40	50	65	80	100	125	150	200	250
H	500			540		580	640	700	750	820	950	1100	1280
T	235、430					430、630				630、1000
h	350
d	25
Protective sleeve diameter	ф28
weight(kg)	8		10	13	15	18	30	35	60	75	85	110	150

Nominal diameter DN(mm) （Valve seat diameter dn）			20				25	32	40	50	65	80	100	125	150	200
			(10)	(12)	(15)	(20)
Rated flow coefficient	Straight grade		1.8	2.8	4.4	6.9	11	17.6	27.5	44	69	110	176	275	440	690
	Equal percentage		1.6	2.5	4	6.3	10	16	25	40	63	100	160	250	400	630
Rated travel(mm)			16					25			40			60
Nominal pressure PN(MPa)			1.0 1.6 4.0 6.4
Inherent flow characteristic			Linear, equal percentage
Inherently adjustable ratio			50
Allowable leakage		Single seat	Hard seal：IV Soft seal：VI level
		Sleeve	Hard seal：II level Soft seal：VI level
working temperature t(℃)			-20~200 -40~250 -40~450 -60~450
Signal range（mA.DC）			0~10 4~20
Mode of action			Electric closed type electric open type
Using ambient temperature（℃）			Electric control valve：-20~70℃
Using environmental humidity			Electric control valve：≤95%
supply voltage			220V 50Hz

Products Consulting / Purchasing

Company：

Mandatory

Name：

Mandatory

Phone：

Mandatory

Email：

Content：

Mandatory

Be sure to write clearly consulted or purchase products detailed parameters and quantity.

Product List